Swing Gate Motors · Abu Dhabi
Brand-agnostic swing gate motor installation for villas, compounds and commercial premises across Abu Dhabi and Al Ain. We size the operator to your leaf weight, geometry and duty cycle, then integrate it with intercom, ANPR and access control.
Updated
Get a free site survey Talk to a specialist
In short: This page covers “Swing Gate Motor for Villas & Compounds”. Emirtech's own engineers carry out the work, as an independent integrator serving Abu Dhabi and Al Ain. A site survey or assessment comes first, then a written itemised quotation.
| Who provides it? | Emirtech Technology, based at M44, Mussafah Industrial Area, Abu Dhabi, in operation since 2018. The work is carried out by Emirtech's own engineers. |
|---|---|
| Where? | Abu Dhabi and Al Ain, served from Emirtech's Mussafah, Abu Dhabi base; there is no Al Ain office. In Dubai: smart home, PABX and IP-PBX phone systems, IT AMC and time attendance by scheduled on-site visits, gate barriers and ANPR by Emirtech itself; CCTV, alarm and access control through SIRA-approved partners, with Emirtech coordinating. |
| What is covered | Swing Gate Motor for Villas & Compounds. |
| Survey and quotation | Emirtech publishes no price list: it surveys or assesses first and then gives a written, itemised quotation. |
| Credentials | Emirtech is an independent systems integrator. It holds no manufacturer-level credential of its own; it installs Control4 through a third-party authorised Control4 dealer, and its ADMCC approval covers security systems only, not IT services. |
| Last reviewed | 21 October 2026 |
Emirtech is a systems integrator (ADMCC-approved for security systems) founded in 2018, operating from M44, Mussafah Industrial Area, Abu Dhabi, and reachable on +971 55 651 7843. We install, repair and service swing gate motors (electric gate openers) for villas, gated compounds, labour camps, warehouses and commercial premises across Abu Dhabi and Al Ain. Our team is brand-agnostic and works across the full operator range — BFT PHOBOS and ATHOS, CAME ATI, FAST and KRONO, FAAC 391, 412, 415 and 422, Nice WALKY, TOONA and POPKIT, along with Beninca and Sommer swing operators. For hidden installation where aesthetics matter, we deploy underground motors such as BFT ELI, CAME FROG and FAAC 760. For retrofits onto existing pillars, we use above-ground articulated-arm motors. We size hardware against measured leaf weight and length, supporting leaves from 200 kg up to 800 kg per leaf, and we verify pillar geometry, hinge condition and ground clearance during a documented site survey. Every installation is integrated with photocell pairs, flashing beacon, key-switch or wireless wall button, and optional battery backup for power cuts. We tie motors into video intercoms, RFID readers, ANPR cameras and BMS contacts where the brief requires it. To be clear on positioning: Emirtech installs and services swing gate motors commercially with field experience — we are NOT an authorised CAME, BFT, FAAC, Nice, Beninca or Sommer distributor or master dealer. We source hardware through legitimate UAE channels and state workmanship terms in the written quotation, with an AMC available for periodic lubrication, photocell alignment, battery checks and control-board diagnostics. To begin, call +971 55 651 7843 or email [email protected] with leaf dimensions, weight estimate and a photo of the existing gate.
Capabilities
Documented site survey covering leaf weight, length, hinge condition, pillar geometry, wind exposure and duty cycle. We specify the right operator from BFT PHOBOS, CAME ATI, FAAC 412 or Nice TOONA based on measured load — not guesswork.
Retrofit installation of articulated-arm and linear-ram operators onto existing villa and compound pillars. Suitable for leaves up to 400 kg with BFT PHOBOS BT, CAME ATI 3000 and FAAC 412 ranges. Minimal civil work required.
Underground operators including BFT ELI 250, CAME FROG and FAAC 760 for compounds where the gate must look unpowered. Includes foundation box, drainage, levered release and concealed cable routing for clean aesthetics.
High-cycle and heavy-leaf operators for labour-camp entries and commercial compounds with leaves from 500 kg up to 800 kg per side. Encoder feedback, magnetic limits and reinforced gearboxes for sustained daily traffic.
Emirtech installs and services swing gate motors commercially across Abu Dhabi and Al Ain. We are not an authorised distributor or master dealer of CAME, BFT, FAAC, Nice, Beninca, Sommer or any specific swing-gate brand — we source hardware through legitimate UAE channels and deliver installation, integration and maintenance work. We do not undertake SIRA-regulated Dubai installations. Call +971 55 651 7843 or request a free swing gate motor consultation.
Integration
Motors wired to call-from-gate video intercoms or ANPR cameras so authorised vehicles open automatically. Compatible with common 2-Easy, Hikvision and Dahua intercoms. Manual override via wireless remote remains available for residents and security staff.
RFID long-range readers and keypad entry for staff, residents and contractors. Cards can be issued, suspended and audited centrally. Motors accept clean dry-contact pulses from any standard access controller for clean separation of duties.
Beam-break photocells, safety edges and obstacle-detection settings tuned during commissioning so the gate stops or reverses when it meets an obstruction such as a vehicle, person or pet. Flashing beacon and pre-warning buzzer fitted as standard on every installation.
Annual maintenance contracts covering lubrication of hinges and rams, photocell alignment, battery condition checks, control-board diagnostics, remote re-programming and obstruction-sensor calibration. Response visits are scheduled on the arrangements agreed in the written quotation.
Before issuing a proposal, we make scope and positioning explicit so there are no surprises during procurement:
Where a request falls outside this scope, we will say so directly and recommend a more appropriate route.
Common questions
We install and service the major European ranges — BFT PHOBOS and ATHOS, CAME ATI, FAST and KRONO, FAAC 391, 412, 415 and 422, Nice WALKY, TOONA and POPKIT, plus Beninca and Sommer operators. Selection depends on measured leaf weight, length and daily duty cycle, not preference.
No. Emirtech installs and services swing gate motors commercially with field experience — we are NOT an authorised CAME, BFT, FAAC, Nice, Beninca or Sommer distributor or master dealer. We source hardware through legitimate UAE channels and state installation, integration and maintenance terms in the written quotation. Our Control4 work is installation through a third-party dealer, which is unrelated to gate motors.
Yes. We deploy BFT ELI 250, CAME FROG and FAAC 760 underground operators where the gate must appear unpowered. This requires excavation for the foundation box, drainage to prevent water ingress, and a manual lever release accessible to residents. We confirm feasibility during the site survey based on ground conditions and existing hinge positions.
Standard residential villa operators cover leaves from 200 kg up to 400 kg per side with lengths up to around 3.5 metres. For commercial compounds and heavy gates we move to higher-duty operators handling up to 800 kg per leaf. We confirm exact model selection only after measuring leaf weight, length, wind exposure and expected daily cycles on site.
Yes. Most operators in our line-up accept a 24 V or 12 V battery backup module that keeps the gate operable for a number of cycles during a mains failure. We size the battery to the typical opening pattern, and the AMC includes battery condition checks so the backup is not silently dead when it is needed.
Yes. We diagnose and repair automatic gates and boom barriers of any brand in Abu Dhabi and Al Ain, whoever installed them, with a reply the same working day; Al Ain is served from our Mussafah office. See automatic gate and barrier repair.
Share leaf dimensions and weight estimate, a photo of the existing gate and pillars, your address and whether you need intercom or ANPR integration. Call +971 55 651 7843 or request a free swing gate motor consultation. A specialist will respond with a scoped proposal once the survey is done.
Yes. Above-ground arm motors have a manual release, usually a key or lever on the arm, that lets each leaf be pushed open by hand. Underground motors are fitted with a manual lever release accessible to residents, as described on this page. Release a leaf only when it is stationary and clear of people and vehicles, and re-engage the release afterwards. Swing leaves can be heavy and can swing back in wind, so move them slowly and call an installer if a leaf will not move freely.
Check the mains supply and breaker first, then the photocells for blocked lenses and the leaves for anything stopping them from opening, such as debris or a stiff hinge. If a battery backup is fitted, it may be flat after a long outage. For underground motors, water collecting in the foundation box is a concern, which is why drainage is part of our installations; if the box is flooded or the motor trips again, stop and call us for gate repair. Release the leaves manually if you need to close the gate in the meantime.
It depends on space and on the gate. A swing gate needs room for the leaves to open and suits villa entrances with solid pillars. A sliding gate needs clear run-off beside the opening and suits wide openings, heavy gates and narrow driveways where leaves cannot swing, so a wide farm entrance often suits a sliding gate. We confirm the choice at a site survey, after measuring leaf weight, pillar geometry and available space, rather than choosing before seeing the gate.
Yes, as supply-and-install projects with survey, motor sizing, installation and commissioning, plus repair and maintenance afterwards. Hardware is sourced through legitimate UAE channels, and Emirtech is not an authorised distributor or master dealer of any swing gate brand. Abu Dhabi is served from our Mussafah base; Al Ain work is by appointment on scheduled visits, as we have no Al Ain office.
Gate or barrier not working? We repair sliding gates, swing gates and boom barriers of any brand in Abu Dhabi and Al Ain, whoever installed them, with a reply the same working day. See automatic gate and barrier repair for the common faults and what we check.
Swing Gate Motors · Abu Dhabi
Free site survey · transparent scope · honest costs · ADMCC-approved for security systems · Mussafah M44 home base since 2018.
Need a free Abu Dhabi site visit? Call +971 55 651 7843 or email [email protected] — we reply the same working day across Abu Dhabi and Al Ain.