Electrical Repair
Fault finding and repair, with a reply the same working day.
Learn more: Electrical RepairElectrician · Apartments, Abu Dhabi
Tripping circuits, dead or warm sockets, flickering lights, ceiling fans and landlord checks inside apartments and flats: a reply the same working day to faults, diagnosed with test instruments and tested after the repair. Emirtech is based in Mussafah, Abu Dhabi.
Updated
In short: This page covers “Electrician for Apartments”. The work is carried out by Emirtech's team and its appointed subcontractors; connection approvals sit with ADDC in Abu Dhabi and AADC in Al Ain and their registered providers. Emirtech replies to enquiries the same working day and does not offer 24/7 or emergency call-out. A site survey comes first, then a written itemised quotation.
| Who provides it? | Emirtech Technology, based at M44, Mussafah Industrial Area, Abu Dhabi, in operation since 2018. Electrical work is carried out by Emirtech's team and its appointed subcontractors. |
|---|---|
| Where? | Abu Dhabi and Al Ain, served from Emirtech's Mussafah, Abu Dhabi base; there is no Al Ain office. In Dubai Emirtech takes only IT AMC and time attendance projects. |
| What is covered | Electrician for Apartments. |
| Survey and quotation | A site survey comes first, then a written, itemised quotation. Emirtech replies to enquiries the same working day; site hours are Monday to Saturday, 8 AM to 7 PM. It does not offer 24/7 or emergency call-out. |
| Credentials | ADMCC approval covers Emirtech's security systems work only, not electrical or solar work. Connection approvals sit with ADDC in Abu Dhabi and AADC in Al Ain and their registered providers. |
| Please note | Emirtech is not a chartered engineering consultancy, does not stamp MEP drawings, and is not ADCD-certified for fire alarm work. It does not file utility applications or sign off for the utility. |
| Last reviewed | 21 October 2026 |
We carry out fault finding and repair, socket, switch, light fitting and ceiling fan installation, distribution board work inside the apartment, partial rewiring, and inspection and testing for tenants, owners and landlords in apartments and flats across Abu Dhabi. We reply the same working day to fault call-outs and test the circuit after each repair.
In apartment buildings the landlord and the building management have a say: permanent changes need the landlord's agreement, and the building's main supply, risers and meters sit with the building management and the distribution company, not with us.
Most apartment call-outs are a handful of patterns: a breaker or RCD that trips, a circuit that has gone dead, lights that flicker, or a warm socket. This table shows the usual cause and what we do.
| Problem | Usual cause | What we do |
|---|---|---|
| Breaker or RCD keeps tripping | Overloaded circuit, a faulty appliance, earth leakage | Isolate and test the circuit, find the cause, repair it |
| Lights flicker | Loose connection, or a dimmer and LED driver that do not match | Test the circuit and replace the mismatched part |
| Dead socket or light circuit | Loose termination, tripped RCBO, failed accessory | Diagnose with instruments and repair |
| Warm or sparking socket | Loose or damaged connection, overloaded circuit | Stop using it; we repair and test |
| Not enough sockets | Older layouts with few outlets | Add sockets from an existing circuit or a new dedicated one |
| Moving in or out | Unknown condition of the installation | Inspect and test, with a documented condition report |
See electrical repair and fault finding for how a call-out works.
For anything beyond a simple repair, usually yes. In a rented apartment the landlord decides on permanent changes such as new circuits or a different board, and the building management normally controls access and anything touching the building's risers or main distribution. We do not work on the building's main supply, risers or meter; those sit with the building management and ADDC. Ask your landlord or building manager before booking larger work.
Between tenancies or before moving in, we inspect and test the installation and hand over a documented condition report, with a list of any remedial work. It records the measured results rather than a visual opinion. See electrical inspection, testing and certification, and for new buildings the handover checklist. For sockets, lights and ceiling fans see light, socket and ceiling fan installation.
Apartment work follows the same honest-scope rules as the rest of our electrical pages.
Common questions
Related Pages
Fault finding and repair, with a reply the same working day.
Learn more: Electrical RepairExtra sockets, light fittings, ceiling fans and switches.
Learn more: Light, Socket & Ceiling Fan InstallationTested and documented, for tenants, owners and landlords.
Learn more: Inspection & TestingWhat moves the price, with indicative ranges.
Learn more: Electrician Cost GuideCall Emirtech for a a reply the same working day, diagnosed and tested.
Mon–Sat 8AM–7PM · [email protected] · M44, Mussafah Industrial Area