Rigid Smart Lighting
Smart lighting dimming
DALI, 0-10 V and Tuya Zigbee dimming drivers, plus COB LED strips
The driver decides how your lighting dims and how it is controlled. Compare wired DALI and 0-10 V with wireless Tuya Zigbee, see the available models and power ratings, and pair them with Rigid LED strips and fixtures.
- DALI
- 0-10 V
- Tuya Zigbee
- 24 V strips and 48 V track
Dimming driversfrom AED 70
In short: a dimming driver converts mains power to the low voltage the LEDs need and accepts a control signal so the light can be dimmed. Rigid Smart Lighting drivers cover DALI (digital, wired), 0-10 V (analogue, wired) and Tuya Zigbee (wireless smart control), plus soft-start, fade-in/out, waterproof and 48 V magnetic-track models. Indicative prices: standard drivers AED 70 – 290, Tuya Zigbee AED 140 – 270, DALI AED 350 – 580, excluding VAT.
Which control?
DALI vs 0-10 V vs Tuya Zigbee
| Control | How it works | Good for | In the Rigid range |
|---|---|---|---|
| DALI | Digital two-wire bus; drivers can be addressed and grouped, with scenes programmed in software. | Larger or changing layouts, hotels, offices, villas with scenes | Dual-CCT and RGB DALI drivers |
| 0-10 V | Analogue control voltage; one signal sets the level of all drivers on that line. | Simple zones and retrofits | 0-10 V dual-CCT driver (confirm other models) |
| Tuya Zigbee | Wireless smart control through a compatible gateway and app, with scenes and schedules. | Homes and apartments where wiring a control bus is impractical | Dual-CCT and RGBCW Tuya drivers; smart fixtures |
| Triac / Bluetooth Mesh | Phase-cut dimming; wireless mesh control. | Mentioned in the documentation | confirm per product |
| KNX | Not stated for these products. KNX can control DALI through a gateway. | Building-wide KNX projects | not claimed |
Driver specifications
Dimming and power drivers
Specifications are taken from the product documentation and are typical values; the exact figures for your model are confirmed in the quotation. Where a feature is shown as “on request”, availability is confirmed before you order.
DALI drivers
| Driver | Power | Output | Size (mm) |
|---|---|---|---|
| Dual-CCT DALI driver | 380W | – | 167×51×23mm |
| RGB DALI driver | 380W | – | 167×51×23mm |
| Dual-CCT DALI driver | 100W | – | 293×43×30mm |
| Dual-CCT DALI driver | 150W | – | 352×43×30mm |
| Dual-CCT DALI driver | 240W | – | 380×49.5×30mm |
| Dual-CCT DALI driver | 75W | – | 293×43×30mm |
0-10 V driver
| Driver | Power | Output | Size (mm) |
|---|---|---|---|
| Dual-CCT 0-10V driver | 400W | out 24V | 112×43×26mm |
Tuya Zigbee smart drivers
| Driver | Power | Output | Size (mm) |
|---|---|---|---|
| Dual-CCT Tuya driver | 100W | out 24V | 170×46×29mm |
| RGBCW Tuya driver | 100W | out 24V | 195×49×29mm |
| Dual-CCT Tuya driver | 200W | out 24V | 170×46×29mm |
| Dual-CCT Tuya driver | 300W | out 24V | 257×46×29mm |
| RGBCW Tuya driver | 300W | out 24V | 287×49×29mm |
| Dual-CCT Tuya driver | 240W | out 24V | 98.5×45×23mm |
| RGBCW Tuya driver | 240W | out 24V | 98.5×45×23mm |
Soft-start and fade-in/out drivers
| Driver | Power | Output | Size (mm) |
|---|---|---|---|
| Fade-in/out driver | 100W | out 24V | 195×48×29mm |
| Fade-in/out driver | 200W | out 24V | 258×48×29mm |
| Soft-start driver | 100W | out 24V | 153×50×25mm |
| Soft-start driver | 200W | out 24V | 170×50×25mm |
| Soft-start driver | 300W | out 24V | 210×55×25mm |
| Soft-start driver | 400W | out 24V | 240×55×25mm |
| Soft-start driver | 60W | out 24V | 140×50×25mm |
48 V magnetic-track drivers
| Driver | Power | Output | Size (mm) |
|---|---|---|---|
| Magnetic driver | 100W | out 48V | 220×45×20mm |
| Magnetic driver | 150W | out 48V | 300×45×20mm |
| Ultra-slim magnetic driver | 100W | out 48V | 265×35×25mm |
| Ultra-slim magnetic driver | 200W | out 48V | 265×35×25mm |
| Magnetic driver | 200W | out 48V | 300×45×20mm |
| Curved magnetic driver | 100W | out 48V | 240×45×22mm |
| Curved magnetic driver | 200W | out 48V | 240×45×22mm |
| Magnetic driver | 100W | out 48V | 240×45×22mm |
| Magnetic driver | 200W | out 48V | 240×45×22mm |
Waterproof (IP65) drivers
| Driver | Power | Output | Size (mm) |
|---|---|---|---|
| Waterproof driver | 100W | out 24V | 160×60×27mm |
| Waterproof driver | 200W | out 24V | 205×60×27mm |
| Waterproof driver | 300W | out 24V | 235×67×31mm |
| Waterproof driver | 400W | out 24V | 260×67×31mm |
Standard 24 V constant-voltage drivers
| Driver | Power | Output | Size (mm) |
|---|---|---|---|
| Single-CCT driver | 100W | out 24V | 230×48×30mm |
| Single-CCT driver | 200W | out 24V | 230×48×30mm |
| Single-CCT driver | 250W | out 24V | 230×48×30mm |
| Standard driver | 120W | – | 163×48×27mm |
| Standard driver | 240W | – | 193×48×27mm |
| Standard driver | 360W | – | 223×48×27mm |
| Standard driver | 60W | – | 133×48×27mm |
| Slim driver | 100W | out 24V | 140×51×25mm |
| Slim driver | 150W | out 24V | 180×51×25mm |
| Slim driver | 200W | out 24V | 180×51×25mm |
| Slim driver | 300W | out 24V | 189×60×29mm |
| Slim driver | 400W | out 24V | 222×60×29mm |
| Slim driver | 60W | out 24V | 121×36×24mm |
COB and LED strips for cove, shelf and cabinet lighting
Strips pair with the 24 V drivers above. The product documentation describes them like this:
- Slim and space-saving for ceilings, cabinets and skirting grooves.
- Soft, bendable and cuttable with a self-adhesive backing for hand installation.
- Smart dimming and colour-temperature control with optional Triac, 0-10 V, DALI and Zigbee drivers.
- Single-CCT, dual-CCT and RGB versions; several COB options with Ra ≥ 95 full spectrum.
LED strip specifications
LED strip rolls
Specifications are taken from the product documentation and are typical values; the exact figures for your model are confirmed in the quotation. Where a feature is shown as “on request”, availability is confirmed before you order.
Strip rolls (24 V class)
| Strip | Power | Roll | CRI | LED density | Width (mm) |
|---|---|---|---|---|---|
| Strip | 15W/m | 10m | Ra≥ 95 (full spectrum) | 140 LED/m | 10mm |
| Dual-CCT strip | 6W/m | 10m | Ra≥ 85 | 120 LED/m | 8mm |
| COB dual-CCT strip | 7W/m | 10m | Ra≥ 95 (full spectrum) | 576 LED/m | 8mm |
| COB dual-CCT strip | 7W/m | 5m | Ra≥ 95 (full spectrum) | 576 LED/m | 5mm |
| Strip | 10W/m | 10m | Ra≥ 85 | 120 LED/m | 8mm |
| Dual-CCT strip | 5W/m | 10m | Ra≥ 85 | 120 LED/m | 8mm |
| Dual-CCT strip | 8W/m | 10m | Ra≥ 98 (full spectrum) | 192 LED/m | 8mm |
| Dual-CCT strip | 14W/m | 10m | Ra≥ 98 (full spectrum) | 288 LED/m | 8mm |
| Dual-CCT strip | 8W/m | 10m | Ra≥ 90 | 192 LED/m | 8mm |
| Single-CCT strip | 10W/m | 10m | Ra≥ 98 (full spectrum) | 120 LED/m | 5/8mm |
| Single-CCT strip | 15W/m | 10m | Ra≥ 98 (full spectrum) | 180 LED/m | 8mm |
| COB single-CCT strip | 12W/m | 10m | Ra≥ 95 (full spectrum) | 320 LED/m | 8mm |
| COB single-CCT strip | 10W/m | 5m | Ra≥ 95 (full spectrum) | 384 LED/m | 8mm |
| COB single-CCT strip | 7W/m | 5m | Ra≥ 95 (full spectrum) | 480 LED/m | 5mm |
| Single-CCT strip | 9W/m | 10m | Ra≥ 93 | 120 LED/m | 5/8mm |
| RGB COB strip | 12W/m | 5m | Ra≥ 85 | 420 LED/m | 10mm |
| RGB strip | 14.4W/m | 5m | Ra≥ 85 | 60 LED/m | 12mm |
| RGBCW strip | 12W/m | 5m | Ra≥ 85 | 60 LED/m | 12mm |
| RGBCW COB strip | 20W/m | 5m | Ra≥ 85 | 840 LED/m | 12mm |
| RGBW strip | 9W/m | 5m | Ra≥ 85 | 60 LED/m | 12mm |
| RGBW COB strip | 20W/m | 5m | Ra≥ 85 | 784 LED/m | 12mm |
| Strip | 12W/m | 10m | Ra≥ 90 | 120 LED/m | 8mm |
Price guide
Driver and strip price guide
Indicative ranges. The driver wattage and control type decide where in the range a model sits.
| Item | Standard | Smart (Tuya) version | Unit |
|---|---|---|---|
| Standard 24 V and 48 V drivers | AED 70 – 290 | – | per driver |
| Tuya Zigbee smart drivers | AED 140 – 270 | – | per driver |
| DALI drivers (dual-CCT, RGB) | AED 350 – 580 | – | per driver |
| 0-10 V dual-CCT driver | AED 180 – 190 | – | per driver |
| Soft-start drivers | AED 90 – 180 | – | per driver |
| Fade-in/out drivers | AED 260 – 350 | – | per driver |
| LED strip rolls (5 m and 10 m) | AED 130 – 550 | – | per roll |
Indicative ranges in AED per piece (per metre or per roll where stated), excluding 5% VAT, installation and delivery. Final price depends on model, quantity, finish, smart option and stock, and is confirmed in a written quotation.
Selection guide
Four checks that avoid a wrong driver
- Add up the loadTotal the watts of strips or fixtures on the driver and choose a driver rated above that figure.
- Match the output voltage24 V strips and fixtures need a 24 V driver; magnetic track systems often need 48 V.
- Choose the controlDALI for programmable scenes, 0-10 V for simple zones, Tuya Zigbee for app control.
- Match the colour channelsSingle-CCT, dual-CCT (warm to cool) and RGB strips each need the matching driver type.
Answers
Dimming driver questions
What is a dimming driver?
It is the power supply for LED lighting. It converts mains power to the low voltage (for example 24 V) that the LEDs need and accepts a control signal such as DALI, 0-10 V or a wireless command, so the brightness can be changed.
How much do DALI and 0-10 V drivers cost in the UAE?
With Rigid Smart Lighting, indicative prices are AED 350 – 580 per DALI driver, about AED 180 – 190 for the 0-10 V driver and AED 140 – 270 per Tuya Zigbee driver, excluding VAT and installation. Wattage and channels move the price within each range.
Should I choose DALI or 0-10 V?
Choose DALI when you want addressable, programmable scenes and groups, or expect the layout to change. Choose 0-10 V for simple zones where one control line dims a set of drivers together.
Do Tuya Zigbee drivers need a gateway?
Zigbee devices normally connect through a compatible gateway or hub and an app. We confirm the gateway and the app set-up for your project when we quote.
Can these drivers be used with KNX?
KNX compatibility is not stated for these drivers and we do not claim it. A KNX system can control DALI drivers through a KNX–DALI gateway; we confirm whether this suits your design and which gateway is needed.
Can I dim any LED strip?
The strip, driver and control must match: voltage, single or dual colour temperature, or RGB. Strips in the range are documented with optional Triac, 0-10 V, DALI and Zigbee drivers; we confirm the exact pairing before quoting.
Are the drivers waterproof?
Most drivers are IP20, meant for indoor, dry locations. The range also includes IP65 waterproof drivers (100 W to 400 W, 24 V output). We do not claim an IP rating for any model that does not list one.
Not sure which driver fits?
Send the fixture or strip list and the control you want. We match the drivers and reply with a written quotation.