Siemens Cerberus · Fire Alarm

Siemens Cerberus PRO Fire Alarm Systems in the UAE — Abu Dhabi & Al Ain

Siemens Cerberus PRO addressable fire detection systems are installed and commissioned by an ADCD-approved fire alarm contractor. Emirtech is an integrator (ADMCC-approved for security systems) that delivers CCTV interlock, access control fail-safe programming and BMS/structured cabling alongside that contractor for commercial, industrial and high-rise projects across Abu Dhabi and Al Ain.

Get a Free Quote Call +971 55 651 7843

Since 2018 In-house Engineers Free Site Survey AMC Available

Security control room monitoring a Siemens Cerberus fire alarm panel interlocked with CCTV in Abu Dhabi

Why choose Siemens Cerberus for fire alarm systems in the UAE?

Siemens Cerberus PRO fire alarm panels in the UAE are installed and commissioned by an ADCD-approved fire alarm contractor — Emirtech is NOT ADCD-approved and does NOT install Cerberus PRO panels, but delivers CCTV interlock, access control fail-safe and BMS cabling integration alongside that contractor.

Siemens Cerberus PRO is a professional addressable fire detection platform developed by Siemens Smart Infrastructure, widely used in commercial offices, hotels, hospitals, educational facilities and large industrial premises throughout the Middle East and beyond. The platform centres on the networkable Cerberus PRO FS720 system, whose FC72x fire detection panels support large loop capacities, flexible zoning and integration with building management systems — making them well suited to multi-floor or multi-building projects where centralised monitoring and rapid fault identification are critical. The compact single-loop FC360 panel (part of Cerberus FIT) serves smaller buildings. Cerberus PRO panels work alongside ASA (Advanced Signal Analysis) intelligent detectors and Sinteso loop devices, which use multi-criteria sensor technology to reduce false alarms by distinguishing genuine fire signatures — such as the combination of smoke, heat and CO — from environmental nuisances such as steam or cooking aerosols. Cerberus Cloud remote services allow facilities managers to monitor system status, receive maintenance alerts and review event logs without needing to attend site, supporting proactive maintenance programmes.

This installation, programming and commissioning work is carried out by an ADCD-approved fire alarm contractor to meet Abu Dhabi Civil Defence (ADCD) standards. Emirtech Technology, an integrator (ADMCC-approved for security systems) based at M44, Mussafah, Abu Dhabi since 2018, delivers the integration layer alongside the appointed contractor where a project needs the panel interlocked with CCTV, access control or BMS — see our fire alarm integration support page for the full, honest scope, or our 4.9-star Google reviews.

Product range

Siemens Cerberus products in the field

FC360 & FS720 Detection Panels

The addressable panels form the control heart of the system: the compact FC360 (part of Cerberus FIT) is a single-loop panel for smaller buildings, while the networkable Cerberus PRO FS720 system (FC72x panels) supports multi-loop configurations with high device capacities for larger buildings. Panels provide event logging, network connectivity and outputs for interfacing with ventilation shutdown, suppression systems and building management infrastructure; remote services such as Cerberus Cloud depend on the panel model, so confirm availability with the fire alarm contractor. Programming panels to the specific zone layout, alarm action sequences and cause-and-effect logic required by each project is carried out by an ADCD-approved fire alarm contractor.

ASA Intelligent Detectors & Sinteso Devices

Siemens ASA (Advanced Signal Analysis) detectors use multi-criteria sensing — combining optical, thermal and carbon monoxide measurements — to achieve early and reliable fire detection while minimising false alarms caused by steam, dust or cooking fumes. Sinteso loop devices extend the range of detection options to include conventional-style addressable call points, sounder bases and input/output modules, allowing the loop to interface with suppression release panels, door holders and other life-safety ancillaries. Device selection and positioning based on room classification and the occupancy requirements set out in ADCD fire alarm guidelines is carried out by an ADCD-approved fire alarm contractor.

Cerberus Cloud Remote Monitoring

Cerberus Cloud is Siemens' remote services platform that connects installed Cerberus PRO panels to a secure cloud portal, giving facilities managers and maintenance teams live system status, fault notifications and event history from any internet-connected device. The platform supports predictive maintenance by flagging detector sensitivity drift and component ageing before they cause system faults or false alarms. Cerberus Cloud connectivity is configured by the ADCD-approved fire alarm contractor during commissioning. Emirtech does not configure or maintain Cerberus Cloud — our integration layer can pass its alerts into your CCTV or BMS dashboards where required.

Emirtech's honest role around a Siemens Cerberus project

The complete project lifecycle for a Cerberus PRO fire alarm installation — site survey, loop design, panel and device installation, cause-and-effect programming, commissioning and as-built documentation for the Civil Defence inspection — is handled by your appointed ADCD-approved fire alarm contractor. Emirtech is not that contractor and does not carry out this regulated scope.

Where the project needs the Cerberus PRO panel interlocked with other building systems, Emirtech delivers the integration layer alongside the fire alarm contractor: CCTV interlock wiring and VMS event mapping so a panel activation triggers camera bookmarking and operator alerts, access control fail-safe/fail-secure programming so doors and barriers respond correctly on a verified fire signal, and structured cabling from the panel's network interface into your BMS where supported. To discuss an integration scope alongside your fire alarm contractor, request a free quotation or call us on +971 55 651 7843.

Integrator (ADMCC-approved for security systems) based in Mussafah, Abu Dhabi since 2018 — not ADCD-approved, not a Siemens authorised distributor
CCTV interlock wiring and VMS event mapping for Cerberus PRO panel activation signals
Access control fail-safe/fail-secure rule programming on a verified fire signal
Structured cabling for Cerberus PRO panel-to-BMS connectivity where supported
Joint integration testing coordinated with the ADCD-approved fire alarm contractor's commissioning
Annual maintenance contract covering the integration layer only — interlock relays, VMS event mapping and BMS gateway cabling

Emirtech engineers coordinating a Siemens Cerberus fire alarm integration project with the ADCD-approved contractor

Typical applications for Siemens Cerberus PRO in Abu Dhabi

Siemens Cerberus PRO's combination of high loop capacity, intelligent detection and remote monitoring capability makes it appropriate for a broad range of building types. Emirtech's integration layer works alongside ADCD-approved fire alarm contractors installing Cerberus PRO for the following project categories across Abu Dhabi and Al Ain.

Commercial offices and business parks: Multi-floor addressable systems with zoned cause-and-effect logic, integration with access control for stairwell release on alarm, and Cerberus Cloud monitoring for facilities management teams.
Hotels and hospitality: High-sensitivity ASA detectors in guest rooms and kitchens to minimise false alarms, with panel programming that sequences evacuation announcements and interfaces with the fire-fighting lift and pressurisation systems.
Industrial warehouses and logistics centres: Beam detectors and heat detectors in high-bay storage, with suppression system interfaces and remote monitoring to support 24-hour operations with minimal on-site staffing.
Healthcare and educational facilities: Addressable systems with staff-alert and phased-evacuation outputs, configured by the ADCD-approved contractor to the applicable ADCD requirements for healthcare occupancy classifications and assembly buildings.
Mixed-use and high-rise developments: Networked Cerberus PRO panels across multiple floors or podium and tower zones, with a single graphical interface for security and facilities control rooms.

Answers

Frequently Asked Questions

Does Emirtech install Siemens Cerberus fire alarm systems in Abu Dhabi?

No. Emirtech is NOT Abu Dhabi Civil Defence (ADCD) approved and is NOT an authorised fire alarm contractor — we do not install, program, commission or service Cerberus PRO panels or detection devices. That regulated scope belongs to your appointed ADCD-approved fire alarm contractor. Emirtech is an integrator (ADMCC-approved for security systems) that delivers CCTV interlock, access control fail-safe programming and structured cabling for panel-to-BMS connectivity alongside that contractor. See our fire alarm integration support page for the full scope.

Is Emirtech an authorised Siemens Cerberus dealer or certified partner?

No. Emirtech is an independent ELV and security-systems integrator, not a manufacturer-designated authorised distributor or certified partner of Siemens. We hold no manufacturer-level credential of our own. Where Cerberus PRO systems are already specified or installed by a project's ADCD-approved fire alarm contractor, Emirtech's integration layer works alongside that installation.

How much does integration support cost around a Siemens Cerberus fire alarm system?

The Cerberus PRO panel, loop devices and their installation are quoted and installed by your ADCD-approved fire alarm contractor. Emirtech provides a separate, free no-obligation quotation for the integration scope it delivers — call +971 55 651 7843 or e-mail [email protected] to arrange yours.

Where does Emirtech deliver Siemens Cerberus integration support?

Emirtech is a systems integrator (ADMCC-approved for security systems) based at Mussafah, Abu Dhabi, delivering this integration service across Abu Dhabi — including the city centre, Mussafah industrial area, Khalifa City, Al Reem Island, Yas Island and surrounding areas — and Al Ain. In Dubai, fire alarm work requires contractors approved by Dubai Civil Defence; Emirtech is not an approved fire-alarm contractor anywhere, so it provides integration support only (CCTV interlock, access-control fail-safe, cabling) alongside your appointed contractor, and SIRA-regulated security elements is delivered through SIRA-approved partners, with Emirtech coordinating.

Does Emirtech issue ADCD (Civil Defence) completion certificates for fire alarm systems?

No. ADCD completion certificates are issued by Abu Dhabi Civil Defence (ADCD) following its own inspection of the work carried out by the project's appointed ADCD-approved fire alarm contractor — not by Emirtech. Emirtech signs off only the integration layer it delivers: the cabling, relays, VMS event rules and access control fire-release logic.

What is the difference between the Siemens FC360 and FS720 panels?

Both are addressable fire detection panels from Siemens, differing primarily in loop capacity and scalability. The FC360 is a compact single-loop panel (part of Cerberus FIT) for smaller buildings, while the networkable Cerberus PRO FS720 system (FC72x panels) supports larger multi-loop configurations for complex or high-rise buildings. Both work with ASA detector technology; Cerberus Cloud services are documented for the networkable Cerberus PRO panels, so confirm availability for the model chosen. Your ADCD-approved fire alarm contractor will recommend the most appropriate panel model based on your building's device count, zoning requirements and future expansion needs during the site survey and design stage.

Fire Alarm Integration Support — Honest Scope

CCTV interlock, access control fail-safe and BMS cabling delivered alongside your ADCD-approved fire alarm contractor. Call +971 55 651 7843.

Fire Alarm Systems Abu Dhabi & Al Ain

How fire alarm systems work in Abu Dhabi & Al Ain, plus honest-scope integration support. Call +971 55 651 7843.

Notifier Fire Alarm UAE

Notifier by Honeywell addressable fire alarm platform detail and Emirtech's honest integration role.

Edwards EST Fire Alarm UAE

Edwards EST addressable fire alarm platform detail and Emirtech's honest integration role.

Ready to secure your property?

Get a free site survey and no-obligation quotation from Abu Dhabi's ADMCC-approved security specialists.