Event source configuration
We configure access controllers and head-end servers to emit door, reader, and tamper events with structured fields — timestamp, cardholder ID, door ID, event code — ready for SIEM ingestion via syslog or REST.
SIEM Access Integration · Abu Dhabi
SIEM Integration for Access Control (Splunk / QRadar) — Abu Dhabi
We configure the access control side of SIEM deployments — forwarding card-reader, door, and tamper events from access controllers into Splunk, IBM QRadar, Microsoft Sentinel, or similar platforms for Abu Dhabi enterprises. Honest scope: we are not a SIEM Authorised Implementation Partner or managed SOC operator.
Get a free site survey Talk to a specialist
ADMCC Approved
Control4 installer
Since 2018
Honest Scope
In short: Emirtech covers SIEM Integration for Access Control (Splunk / QRadar) in Abu Dhabi and Al Ain: design or supply, installation, configuration and support by its own engineers. It is ADMCC-approved as a company; ADMCC makes the final approval decision for each installation. A site survey comes first, then a written itemised quotation.
SIEM Integration for Access Control (Splunk / QRadar): key facts
| Who provides it? | Emirtech Technology, based at M44, Mussafah Industrial Area, Abu Dhabi, in operation since 2018. The work is carried out by Emirtech's own engineers. |
|---|---|
| Where? | Abu Dhabi and Al Ain. Emirtech holds no SIRA registration; Dubai CCTV, alarm and access control projects are delivered through SIRA-approved partners, with Emirtech coordinating. |
| What is covered | SIEM Integration for Access Control (Splunk / QRadar): design or supply, installation, configuration and support. |
| Survey and quotation | A site survey comes first, then a written, itemised quotation. There is no price list and no standard duration: cost depends on the site, and the schedule is given in the quotation. |
| Credentials | Emirtech is an ADMCC-approved security systems company. That is a company approval; ADMCC makes the final approval decision for each installation. |
| Last reviewed | 21 October 2026 |
How does SIEM integration for access control work in Abu Dhabi?
Emirtech Technology is an ADMCC-approved electronic security installer operating from M44, Mussafah Industrial Area, Abu Dhabi since 2018, configuring the access control side of SIEM (Security Information and Event Management) integrations across Abu Dhabi and Al Ain. SIEM platforms centralise security events from network devices, endpoints, servers, access control, CCTV, and IDS/IPS for correlation, alerting, and forensic search. On the access control side we forward door events — granted, denied, forced-open, held-open, anti-passback violation, reader tamper, controller offline — to your SIEM via syslog, REST API, or vendor-specific connectors, with structured fields (timestamp, cardholder ID, door ID, event code) and time synchronised via NTP for reliable correlation. We work with access control platforms whose event streams are commonly ingested by Splunk Enterprise, IBM QRadar, Microsoft Sentinel, LogRhythm, Elastic Security, and ArcSight (HPE). Typical correlation use cases include failed-card-attempt combined with simultaneous CCTV-motion (potential tailgating or breach), out-of-hours door-open without corresponding HR roster entry, controller-offline events tied to network anomalies, and privileged-area access correlated with SOC ticket workflow. We are not a Splunk, IBM QRadar, Microsoft Sentinel, LogRhythm, Elastic, or ArcSight Authorised Implementation Partner, and we are not a managed SOC operator — SIEM platform design, parser tuning, correlation-rule engineering, dashboard creation, and 24/7 monitoring remain with your SIEM vendor, system integrator, or in-house SOC. Our scope is the access control endpoint: event source configuration, syslog/API forwarding, field mapping documentation, and joint testing with your SIEM team. Please note that internal SIEM monitoring is separate from any central station alarm-monitoring arrangement your facility category may require (that service comes from a third-party monitoring centre; Emirtech does not run one). To discuss event sources, parser samples, or a pilot integration, call +971 55 651 7843 or email [email protected].
SIEM access control integration capabilities
What we configure on the access control side for SIEM ingestion
Syslog and REST forwarding
We set up syslog over TLS (RFC 5425 transport, RFC 5424 format) or REST API forwarding to Splunk HEC, QRadar log source, Microsoft Sentinel data connector, or LogRhythm collector, including retry, buffering, and source-host identification.
Time synchronisation and tagging
We align controllers, servers, and forwarders to a common NTP source and apply consistent host, site, and zone tags so SIEM correlation rules can join access events with network, endpoint, and CCTV telemetry reliably.
Joint testing with SIEM team
We provide sample event payloads, field-mapping notes, and joint test plans for your SIEM integrator — verifying parsing, dashboard visibility, and that simulated forced-open or tamper events trigger expected SIEM alerts.
Access event forwarding and SIEM integration checklist
From event source enablement to joint testing with your SIEM and SOC team, we deliver the access control endpoint of the integration with documented field mappings and a pilot-first approach. To discuss event sources, supported platforms, and a sample payload set, call +971 55 651 7843 or request a free SIEM access integration consultation.
- Inventory access control event sources (controllers, head-end, mobile readers)
- Enable structured event logging on controllers and head-end servers
- Configure syslog over TLS (RFC 5425 / RFC 5424) or REST API forwarding to SIEM
- Align time across controllers, servers, and forwarders via NTP
- Apply consistent host, site, and zone tags for correlation joins
- Document field mappings (event code, door, cardholder, reader) for SIEM parsers
- Provide sample event payloads for SIEM parser tuning by your vendor
- Test forced-open, held-open, denied-access, and tamper event flow end-to-end
- Verify controller-offline and heartbeat events reach the SIEM
- Coordinate with SIEM integrator on correlation use-case requirements
- Hand over runbook covering event source health checks and re-enrolment
- Schedule periodic event-flow verification with the customer SOC
Common access control correlation use cases
Event patterns SIEM correlation rules commonly look for
Tailgating and breach indicators
Failed-card-attempt or forced-open events correlated with simultaneous CCTV motion analytics, intrusion sensor activation, or absence of a corresponding entry/exit pair — surfaced to SOC analysts for review and on-site response.
Out-of-hours and roster anomalies
Door-open events outside scheduled hours or without a corresponding HR roster, work-permit, or visitor-management record — useful for facilities with strict shift patterns or contractor controls.
Controller health and tamper
Controller-offline, reader-tamper, enclosure-tamper, and power-loss events correlated with network telemetry — helping distinguish maintenance activity, network outages, and potential physical attack.
Privileged area and audit support
Access to data centre cages, server rooms, vaults, or executive areas correlated with change-management tickets, supporting internal audit, ISO/SOC-style evidence packs, and incident review by your governance team.
Scope — what we deliver and explicitly do not
SIEM integration is a multi-vendor engagement. We are clear about which part Emirtech delivers and which parts remain with your SIEM vendor, integrator, or in-house SOC.
- We deliver: access control event source configuration, syslog and REST forwarding to SIEM, time synchronisation, field-mapping documentation, sample event payloads, and joint end-to-end testing with your SIEM team.
- We do not deliver: SIEM platform design, log parser engineering, correlation-rule development, dashboard and report creation, threat hunting, SOAR playbook authoring, or 24/7 monitoring services.
- We are not: a Splunk, IBM QRadar, Microsoft Sentinel, LogRhythm, Elastic Security, or ArcSight (HPE) Authorised Implementation Partner; not a managed SOC operator; not a central station alarm-monitoring operator.
- We are not affiliated with: Splunk (Cisco), IBM QRadar, Microsoft Sentinel, LogRhythm, Elastic Security, ArcSight (HPE), or authorised SIEM distributors in the UAE.
- We coordinate cleanly with your nominated SIEM integrator and document every event source and field mapping for handover.
- We operate within Abu Dhabi and Al Ain only for ADMCC-regulated electronic security work; the SIEM platform itself may sit on any approved infrastructure your team selects.
- Internal SIEM monitoring is separate from any central station alarm-monitoring requirement for your facility — both can coexist but serve different purposes.
- Pilot-first approach: we recommend a small set of doors and event types initially, validate parsing and dashboards, then scale to full estate.
This honest division of work prevents overlap, reduces risk during SOC roll-out, and ensures the customer retains a single accountable SIEM owner. For an integration plan tailored to your access control platform and SIEM, call +971 55 651 7843.
Common questions
FAQs
Are you an Authorised Implementation Partner for Splunk, QRadar, or Microsoft Sentinel?
No. Emirtech is not an Authorised Implementation Partner of Splunk, IBM QRadar, Microsoft Sentinel, LogRhythm, Elastic Security, or ArcSight, and we are not a managed SOC operator. We configure the access control side — event sources, syslog/REST forwarding, field mappings, and joint testing — while SIEM platform design, parser tuning, correlation rules, and monitoring remain with your authorised SIEM partner or in-house SOC.
Which access control events can you forward to a SIEM?
Typical events include access granted, access denied, forced-door, door-held-open, anti-passback violation, reader tamper, enclosure tamper, controller offline, controller power loss, and administrator configuration changes. Each event carries timestamp, door ID, reader ID, cardholder ID (where permitted), and event code in a structured format suitable for SIEM parsers.
Do you support syslog, REST, or both?
Both, depending on the access control platform. We prefer syslog over TLS (RFC 5425 transport, RFC 5424 format) where supported for reliability and standardisation, and use REST API forwarding (for example into Splunk HEC or Microsoft Sentinel data connectors) where the platform exposes a richer JSON event model. We document the chosen method and field mappings for your SIEM team.
Can SIEM monitoring replace a central station alarm-monitoring requirement?
No. Where a facility category requires central station alarm monitoring, that is a separate service from a third-party monitoring centre (Emirtech does not run one) with its own scope. Internal SIEM monitoring complements it for broader security operations — log retention, correlation, audit — but does not substitute for a central station arrangement. We can explain the boundary for your specific facility category.
Will biometric data be sent to the SIEM?
No. We forward event metadata (who, where, when, outcome) — not biometric templates or raw images. Biometric template data is sensitive personal data under UAE Federal Decree-Law No. 45 of 2021 (PDPL) and is configured for on-device storage and encrypted transmission within the access control system, never streamed to general-purpose SIEM logs.
How do we obtain a quote for SIEM access control integration?
Call +971 55 651 7843, email [email protected], or use our quotation form. Share the access control platform, target SIEM, approximate number of doors and controllers, and any specific correlation use cases. We provide a scoped proposal covering event source enablement, forwarding configuration, documentation, and joint testing — clearly excluding SIEM-side parser, rule, and dashboard work owned by your SIEM partner.
SIEM Access Integration · Abu Dhabi
Talk to an Abu Dhabi specialist
Free site survey · transparent scope · honest costs · ADMCC-approved for security systems · Mussafah M44 home base since 2018.
Need a free Abu Dhabi site visit? Call +971 55 651 7843 or email [email protected] — we reply the same working day across Abu Dhabi and Al Ain.