QSC Q-SYS · Abu Dhabi
QSC Q-SYS audio, video and control platform installation across Abu Dhabi and Al Ain — Core processors, NL network loudspeakers, AcousticDesign speakers and TSC touchscreens commissioned by Emirtech's in-house engineers.
Get a free site survey Talk to a specialist
In short: This page covers “QSC Q-SYS Audio Control Installation”. Emirtech's own engineers carry out the work, as an independent integrator serving Abu Dhabi and Al Ain. A site survey or assessment comes first, then a written itemised quotation.
| Who provides it? | Emirtech Technology, based at M44, Mussafah Industrial Area, Abu Dhabi, in operation since 2018. The work is carried out by Emirtech's own engineers. |
|---|---|
| Where? | Abu Dhabi and Al Ain, served from Emirtech's Mussafah, Abu Dhabi base; there is no Al Ain office. In Dubai: smart home, PABX and IP-PBX phone systems, IT AMC and time attendance by scheduled on-site visits, gate barriers, ANPR, video intercoms and turnstiles by Emirtech itself; CCTV, alarm and access control through SIRA-approved partners, with Emirtech coordinating. |
| What is covered | QSC Q-SYS Audio Control Installation. |
| Survey and quotation | Emirtech publishes no price list: it surveys or assesses first and then gives a written, itemised quotation. |
| Credentials | Emirtech is an independent systems integrator. It holds no manufacturer-level credential of its own, and its ADMCC approval covers security systems only, not IT services. |
| Last reviewed | 21 October 2026 |
Emirtech Technology is an audiovisual and ELV contractor (ADMCC-approved for security systems) founded in 2018, operating from M44, Mussafah Industrial Area, Abu Dhabi. We install and commission the full QSC Q-SYS audio, video and control ecosystem across Abu Dhabi and Al Ain — including Q-SYS Core 8 Flex, Core 110f, Core 510i, Core Nano and NV-32-H processors, NV / NL series network I/O endpoints, Q-SYS NL Network Loudspeakers, QSC AcousticDesign AD-CI, AD-S and AD-Ceiling series commercial speakers, Q-SYS Touchscreens (TSC) and Q-SYS Reflect cloud management. Designs are built and tuned using Q-SYS Designer Software. Q-SYS is a premium native-network AV platform widely specified in conference rooms, hospitality venues, corporate boardrooms, lecture theatres, houses of worship, retail experience centres and performance spaces — competing directly with Crestron, Extron, AMX, Biamp and Symetrix. Our remit covers structured cabling, AVB / Q-LAN VLAN design alongside the client's IT team, rack build-out, loudspeaker mounting and aiming, DSP file loading, gain structure, AEC tuning, control programming hand-off and end-user training. We are commercial integrators installing QSC equipment procured via authorised QSC channels in the UAE; we are not a QSC Q-SYS Designer, not a Q-SYS Authorised Partner, and not on QSC's programmer certification roster. Where deep custom Q-SYS scripting or Lua-level DSP design is required, we partner with a certified Q-SYS programmer and handle the physical install, networking and commissioning ourselves. Standalone PA installation is in scope; voice-evacuation interlock with the fire-alarm system is ADCD-scope and must be delivered by an ADCD-approved fire-alarm contractor — we coordinate but do not certify that interface. For a site survey or written quotation contact +971 55 651 7843 or [email protected].
QSC Q-SYS Platform Capabilities
Install and rack-mount Q-SYS Core 8 Flex, Core 110f, Core 510i, Core Nano and NV-32-H processors. Load Q-SYS Designer files, configure Q-LAN networking, set audio matrix routing and DSP processing for conference, hospitality and performance environments.
Mount and tune Q-SYS NL Network Loudspeakers with native PoE+ connectivity, plus QSC AcousticDesign AD-CI in-ceiling, AD-S surface-mount and AD-Ceiling series commercial speakers. Tap settings, EQ and zone calibration handled in Q-SYS Designer.
Deploy Q-SYS TSC touchscreens for room control, source selection, volume zoning and camera presets. Wall-mount or table-mount configurations, PoE-powered, with user-interface layout commissioned during handover and signed off by the client.
Enrol commissioned Cores into Q-SYS Reflect for remote monitoring, system health alerts and asset tracking across multi-site estates. Handover includes admin account setup, dashboard walkthrough and documentation for the client's AV and IT teams.
Every QSC Q-SYS deployment starts with a site survey covering acoustics, rack space, network readiness and user-control requirements. We coordinate with your IT team on Q-LAN VLAN segregation, multicast and PTP timing, then build the Q-SYS Designer file, mount endpoints, terminate cabling and commission DSP, AEC and routing on site. To start a project, call +971 55 651 7843 or request a free Q-SYS consultation.
Verticals We Serve
Multi-room conference estates with Microsoft Teams Rooms, Zoom Rooms and BYOD integration. Core 8 Flex or Core 110f with AEC, ceiling microphones, NL loudspeakers and TSC touchscreens for one-touch meeting start.
Hotel ballrooms, banquet halls, lobbies and restaurants with multi-zone background music, paging override and source switching. AcousticDesign AD-CI ceiling speakers and AD-S surface units across distributed zones.
Universities, training centres and auditoria with Core 510i for large channel counts, lecture-capture integration, assisted-listening output and TSC podium control. Q-SYS Reflect for IT-team visibility across campus.
Auditoria, theatres, mosques and churches needing tight latency, multi-language reinforcement and broadcast feeds. NV-32-H for AV-over-IP video and Q-SYS DSP for line-array tuning, delay zones and monitor mixes.
Honest scope matters on a premium AV control platform like Q-SYS. The list below sets out what Emirtech delivers as the installation and commissioning contractor, and what sits outside our remit.
If your scope needs certified Q-SYS programming, ADCD voice-evacuation sign-off, or any approval we do not hold, we will say so up front and route that portion to the correct contractor.
Common questions
No. Emirtech is not a QSC Q-SYS Authorised Partner, not a certified Q-SYS Designer, and not on QSC's programmer certification roster. We are a commercial integrator that installs Q-SYS equipment procured through authorised UAE channels and commissions it on site. For deep Lua scripting or complex custom UCI work we partner with a certified Q-SYS programmer and handle the physical install, networking and commissioning ourselves.
Standalone PA and background-music installation using Q-SYS is in our scope. However, voice-evacuation interlock with the fire-alarm system is ADCD-scope under Abu Dhabi Civil Defence regulations. Emirtech is not an ADCD-approved voice-evacuation contractor, so that interface must be delivered and certified by an ADCD-approved fire-alarm contractor. We coordinate the trim points and handover but do not certify the voice-evac function.
It depends on channel count, room count and feature set. Core Nano suits small huddle rooms; Core 8 Flex covers single mid-size meeting rooms; Core 110f handles larger boardrooms with AEC; Core 510i suits campuses, auditoria and multi-zone hospitality; NV-32-H adds AV-over-IP video routing. We size the Core during the site survey based on inputs, outputs, DSP load and growth headroom.
Q-LAN runs on standard Ethernet but needs VLAN segregation, IGMP querier configuration, PTP timing and QoS to behave correctly. We provide the Q-SYS networking requirements document and work alongside your IT team to configure switches — typically managed Layer 2 / 3 with PoE+ for endpoints. If a dedicated AV network is preferred, we can specify and install the QSC-recommended switching as part of the scope.
Abu Dhabi and Al Ain are our priority areas, and in Dubai: smart home, PABX and IP-PBX phone systems, IT AMC and time attendance by scheduled on-site visits, gate barriers, ANPR, video intercoms and turnstiles by Emirtech itself, and CCTV, alarm and access control through SIRA-approved partners, with Emirtech coordinating; we do not mobilise to Sharjah or the Northern Emirates. Within Abu Dhabi this includes the islands, Mussafah, Khalifa City, Yas Island, Saadiyat Island, Al Reem, Al Raha, Mohammed Bin Zayed City and the Western Region towns where commercial AV demand exists.
Call +971 55 651 7843 or email [email protected] to arrange a site survey at your Abu Dhabi or Al Ain premises. You can also request a free Q-SYS consultation online — share your room schedule, drawings if available, and intended use case and we will revert with a written, itemised proposal covering processors, endpoints, cabling, programming hand-off and commissioning.
QSC Q-SYS · Abu Dhabi
Free site survey · transparent scope · honest costs · ADMCC-approved for security systems · Mussafah M44 home base since 2018.
Need a free Abu Dhabi site visit? Call +971 55 651 7843 or email [email protected] — we reply the same working day across Abu Dhabi and Al Ain.