Identify & Govern (ID, GV)
Asset inventory through Microsoft Intune and network discovery, software bill-of-materials capture, vulnerability scanning, and configuration baselines that feed your GRC team's risk register and governance documentation.
NIST Technical Layer · Honest Scope
NIST CSF & 800-53 Technical Controls — Honest Scope
Emirtech delivers the technical-control layer that maps to NIST CSF 2.0 and NIST 800-53 Rev 5 for Abu Dhabi customers doing business with US federal agencies, US suppliers, or aligning to US standards. We are not a CMMC C3PAO and we do not certify — we engineer the controls your GRC consultancy will evidence.
Get a free site survey Talk to a specialist
Free Site Survey
Control4 installer
Since 2018
Honest Scope
In short: This page covers “NIST CSF & 800-53 Technical Controls” from the technical side, with honest scope. Emirtech installs and configures systems; it is not an auditor, certification body or legal adviser, so confirm the standard or regulation with the relevant authority, auditor or adviser.
NIST CSF & 800-53 Technical Controls: key facts
| Who provides it? | Emirtech Technology, based at M44, Mussafah Industrial Area, Abu Dhabi, in operation since 2018. The work is carried out by Emirtech's own engineers. |
|---|---|
| Where? | Abu Dhabi and Al Ain, served from Emirtech's Mussafah, Abu Dhabi base; there is no Al Ain office. In Dubai: smart home, PABX and IP-PBX phone systems, IT AMC and time attendance by scheduled on-site visits, gate barriers, ANPR, video intercoms and turnstiles by Emirtech itself; CCTV, alarm and access control through SIRA-approved partners, with Emirtech coordinating. |
| What is covered | NIST CSF & 800-53 Technical Controls. |
| Survey and quotation | Emirtech publishes no price list: it surveys or assesses first and then gives a written, itemised quotation. |
| Credentials | Emirtech is an independent systems integrator. It holds no manufacturer-level credential of its own, and its ADMCC approval covers security systems only, not IT services. |
| Please note | General information, not legal, audit or certification advice. Emirtech is not an auditor, certification body or legal adviser; confirm the standard or regulation with the relevant authority, auditor or adviser. |
| Last reviewed | 21 October 2026 |
What does Emirtech actually deliver against NIST CSF and 800-53 in Abu Dhabi?
Emirtech Technology — founded in 2018, ADMCC-approved for security systems, based at M44, Mussafah Industrial Area, Abu Dhabi — engineers and operates the technical-control layer that maps to NIST Cybersecurity Framework 2.0 (Identify, Protect, Detect, Respond, Recover, Govern) and NIST 800-53 Rev 5 control families for UAE companies that do business with US federal agencies, supply US primes, or simply want to align to a recognised US standard. We are honest about what that means: Emirtech is not a NIST 800-171 / CMMC consultancy, not a third-party assessor, and not a NIST certification body — NIST does not certify anyone, and CMMC certification is issued by CMMC C3PAOs accredited by the Cyber AB. Our role is the engineering layer that your GRC consultancy or C3PAO will evidence during their assessment. On Identify (ID) and Govern (GV) we deliver asset inventory through Microsoft Intune and network discovery, plus vulnerability scanning. On Protect (PR) we implement Microsoft Entra ID with phishing-resistant MFA, Conditional Access policies, role-based access control, Intune compliance baselines, BitLocker full-disk encryption, TLS 1.2/1.3 enforcement, and FortiGate network segmentation. On Detect (DE) we deploy Microsoft Sentinel SIEM with NIST-aligned analytics rules, Microsoft Defender for Endpoint EDR, and continuous vulnerability management. On Respond (RS) and Recover (RC) we provide technical evidence, log preservation, and recovery tooling — the procedural runbook sits with your incident-response retainer. We work alongside your appointed GRC consultancy, CMMC C3PAO, or US-prime compliance team and we hand over clean technical artefacts they can map directly to AC, AU, CM, IA, SC, and SI control families. For an honest scoping conversation against your NIST or CMMC obligations, call +971 55 651 7843 or email [email protected].
Technical-control capabilities mapped to NIST
Where Emirtech engineering plugs into NIST CSF 2.0
Protect (PR) — Identity & Access
Microsoft Entra ID with phishing-resistant MFA, Conditional Access policies, RBAC, privileged-access workflows, Intune compliance baselines, BitLocker full-disk encryption, and TLS 1.2/1.3 enforcement aligned to AC, IA, and SC families.
Detect (DE) — SIEM & EDR
Microsoft Sentinel SIEM with NIST-aligned analytics rules and KQL detections, Microsoft Defender for Endpoint EDR telemetry, vulnerability management, and audit-log retention aligned to AU and SI control families.
Respond & Recover (RS, RC)
Technical evidence support during incidents, log preservation, isolation actions through Defender, backup and recovery tooling, and clean handover artefacts for your incident-response retainer and post-incident review.
NIST 800-53 Rev 5 control families we engineer
Emirtech builds the technical layer customers and their assessors can map to specific 800-53 control families. We do not interpret regulations, write the System Security Plan, or issue certification — that is your GRC consultancy's or C3PAO's role. Call +971 55 651 7843 or request a free NIST technical-scope consultation.
- AC (Access Control) — Entra ID Conditional Access, RBAC, session controls, privileged-access workflows
- AU (Audit & Accountability) — Microsoft Sentinel log ingestion, retention policies, immutable archive options
- CM (Configuration Management) — Intune device baselines, configuration drift detection, change records
- IA (Identification & Authentication) — Entra ID with phishing-resistant MFA, FIDO2 keys, device-bound credentials
- SC (System & Communications Protection) — FortiGate segmentation, TLS 1.2/1.3, BitLocker, IPsec site-to-site
- SI (System & Information Integrity) — Microsoft Defender for Endpoint EDR, vulnerability management, patch cadence
- IR (Incident Response) — technical evidence collection, isolation actions, log preservation for your IR retainer
- RA (Risk Assessment) — vulnerability scanning data and asset inventory feeding your GRC team's risk register
- CP (Contingency Planning) — backup tooling, Azure Site Recovery options, recovery-point evidence
- PE (Physical & Environmental) — ADMCC-approved physical security controls for Abu Dhabi facilities
- AT (Awareness & Training) — Microsoft Defender attack-simulation tooling for your training programme
- SR (Supply Chain Risk Management) — vendor inventory data for your supply-chain risk documentation
How we collaborate with your GRC partner
Engineering layer that your consultancy can evidence
Joint scoping with your GRC team
We sit in the same room as your appointed CMMC C3PAO, NIST consultancy, or US-prime compliance lead and agree which 800-53 controls Emirtech will engineer versus which sit with policy, training, or governance teams.
Evidence-ready artefacts
Configuration exports, Sentinel workbook screenshots, Intune compliance reports, Entra ID Conditional Access policy snapshots, and FortiGate rule-base extracts formatted so your assessor can map directly to control IDs.
Ongoing operations
Patching cadence, vulnerability remediation, Conditional Access tuning, Sentinel detection tuning, and control reviews so your NIST posture does not drift between formal assessments.
Honest handover to assessors
When your C3PAO or external auditor arrives, we present technical evidence factually. We do not write your SSP, POA&M, or interpret control intent — that boundary protects both your assessment integrity and ours.
Scope — what we deliver and explicitly do not
NIST CSF 2.0 and NIST 800-53 Rev 5 are control catalogues that span policy, governance, procedure, and engineering. Emirtech occupies the engineering corner only. Honest scoping prevents you from buying the wrong service from the wrong provider, and prevents assessors from challenging an over-claimed posture.
- We deliver: Microsoft Entra ID with phishing-resistant MFA and Conditional Access, Microsoft Sentinel SIEM with NIST-aligned analytics, Microsoft Defender for Endpoint EDR, Intune device baselines, FortiGate network segmentation, BitLocker encryption, vulnerability scanning, and evidence-ready technical artefacts mapped to 800-53 control families.
- We do not deliver: System Security Plans (SSP), Plans of Action and Milestones (POA&M), CMMC pre-assessment gap analysis, formal CMMC certification, NIST 800-171 self-assessment scoring, third-party audit services, policy authorship, or regulatory interpretation.
- We are not: a CMMC C3PAO, a CMMC Registered Provider Organisation (RPO), a NIST certification body, an IRCA-registered lead auditor firm, or an Authorised partner of any networking or security brand. We install and programme Control4 working with a third-party authorised dealer.
- We are not affiliated with: National Institute of Standards and Technology (NIST), US Department of Defense (DoD), CMMC Accreditation Body (Cyber AB), CMMC C3PAOs, IRCA, ISACA, or SANS Institute.
- Customers can engage Emirtech in parallel with a separate GRC consultancy or appointed C3PAO — we handle the engineering, they handle the governance documentation and the formal assessment.
- Regulated electronic security work in Abu Dhabi and Al Ain is delivered under our ADMCC-approved scope. Abu Dhabi and Al Ain are our priority areas, and in Dubai: smart home, PABX and IP-PBX phone systems, IT AMC and time attendance by scheduled on-site visits, gate barriers, ANPR, video intercoms and turnstiles by Emirtech itself, and CCTV, alarm and access control through SIRA-approved partners, with Emirtech coordinating; we do not mobilise to Sharjah or the Northern Emirates.
- We will tell you in writing which controls are out of scope for an Emirtech engagement so your assessor has no ambiguity.
If your US prime, federal customer, or board has asked for NIST alignment and you need a credible engineering partner that knows where its scope ends, Emirtech is a straightforward conversation away.
Common questions
FAQs
Is Emirtech a CMMC C3PAO or NIST-certified consultancy?
No. Emirtech is not a CMMC Third-Party Assessor Organisation (C3PAO), not a CMMC Registered Provider Organisation (RPO), and not a NIST-certified consultancy — NIST does not certify anyone in the first place. We deliver the technical-control layer that maps to NIST CSF 2.0 and NIST 800-53 Rev 5 control families. Your formal CMMC certification must come from an accredited C3PAO.
Are you affiliated with NIST, the US DoD, or the Cyber AB?
No. Emirtech has no affiliation with the National Institute of Standards and Technology (NIST), the US Department of Defense (DoD), the CMMC Accreditation Body (Cyber AB), IRCA, ISACA, or SANS Institute. We engineer technical controls that customers and their appointed assessors can map to published NIST control catalogues.
Can you write our System Security Plan or POA&M?
No. Authoring the System Security Plan (SSP), Plan of Action and Milestones (POA&M), or any other governance documentation is the role of a GRC consultancy or your in-house compliance team. Emirtech provides the technical configuration evidence those documents will reference.
Which 800-53 control families does Emirtech engineer in practice?
AC (Access Control), AU (Audit and Accountability), CM (Configuration Management), IA (Identification and Authentication), SC (System and Communications Protection), SI (System and Information Integrity), and supporting evidence for IR, RA, CP, PE, AT, and SR families through tooling and configuration data.
Do you operate a 24/7 SOC for NIST Detect and Respond functions?
No. Emirtech is not a 24/7 SOC operator. We engineer Microsoft Sentinel SIEM and Microsoft Defender for Endpoint EDR — including analytics rules, KQL detections, and automation playbooks — and the customer either staffs in-house monitoring or engages a separate managed SOC. We are transparent about that boundary.
How do we get a quote for the NIST technical-control layer?
Call +971 55 651 7843, email [email protected], or request a free NIST technical-scope consultation. We will scope which controls Emirtech engineers, which sit with your GRC partner, and provide a written proposal so there is no ambiguity for your assessor.
NIST Technical Layer · Honest Scope
Talk to an Abu Dhabi specialist
Free site survey · transparent scope · honest costs · ADMCC-approved for security systems · Mussafah M44 home base since 2018.
Need a free Abu Dhabi site visit? Call +971 55 651 7843 or email [email protected] — we reply the same working day across Abu Dhabi and Al Ain.