Gates

CAME vs BFT vs FAAC vs Nice: How to Choose Gate Automation in the UAE

CAME, BFT, FAAC and Nice are four of the gate automation brands most often named in the UAE. This guide explains what really separates them on a UAE site, and why the model, the control board, the spares and the installer matter more than the badge.

Get a Free Quote Call +971 55 651 7843

Free Site Survey Since 2018 Abu Dhabi & Al Ain

In short: all four are Italian-founded makers with sliding, swing and barrier operators, control boards and remotes. On a real site the differences that matter are the specific model and its duty cycle, whether remotes and receivers are compatible, how easily spares are found in the UAE, and who installs and services it. Emirtech is brand-agnostic and holds no partner status with any of the four, so it does not rank them; it recommends the operator that fits the gate, the traffic and the heat.

CAME vs BFT vs FAAC vs Nice: How to Choose Gate Automation in the UAE: key facts

Published by	Published by Emirtech Technology, an independent integrator in Mussafah, Abu Dhabi, in operation since 2018.
Where?	Abu Dhabi and Al Ain, served from Emirtech's Mussafah, Abu Dhabi base; there is no Al Ain office. In Dubai: smart home, PABX and IP-PBX phone systems, IT AMC and time attendance by scheduled on-site visits, gate barriers, ANPR, video intercoms and turnstiles by Emirtech itself; CCTV, alarm and access control through SIRA-approved partners, with Emirtech coordinating.
Survey and quotation	Emirtech publishes no price list: it surveys or assesses first and then gives a written, itemised quotation.
Credentials	Emirtech is an independent systems integrator. It holds no manufacturer-level credential of its own, and its ADMCC approval covers security systems only, not IT services. It claims no partner status with the vendors named on this page. Product brands named on this page are trademarks of their owners.
Last reviewed	14 November 2026

CAME, BFT, FAAC and Nice at a glance

The table compares what can be said about the four brands in general terms. Product lines and specifications change, so confirm any model against the manufacturer's current datasheet.

Point	CAME	BFT	FAAC	Nice
Where the brand is from	Italy	Italy	Italy	Italy
Operator types offered	Sliding, swing, barrier and underground operators	Sliding, swing and barrier operators	Sliding, swing and barrier operators, including hydraulic swing operators	Sliding, swing and barrier operators
Control boards and accessories	Own boards, photocells, safety edges and receivers	Own boards, photocells, safety edges and receivers	Own boards, photocells, safety edges and receivers	Own boards, photocells, safety edges and receivers
Remotes and receivers	Brand-specific; usually replaced if the operator brand changes	Brand-specific; usually replaced if the operator brand changes	Brand-specific; usually replaced if the operator brand changes	Brand-specific; usually replaced if the operator brand changes
What to confirm for the UAE	Model duty cycle, temperature range, spares source, local service	Model duty cycle, temperature range, spares source, local service	Model duty cycle, temperature range, spares source, local service	Model duty cycle, temperature range, spares source, local service

What really separates the brands on a UAE site

On paper the four brands cover the same ground: sliding, swing and barrier operators, control boards, safety devices and remotes. In practice a gate fails or lasts because of sizing, installation, heat, sand and servicing. A well-chosen model from any of the four will outlast a badly chosen model from the best-known one. The questions that decide the result are the model's duty cycle, its rated leaf weight, its operating temperature range, and how well it is installed.

Remotes and accessories tie you to a brand

Each brand uses its own remote and receiver system. If a gate is later changed to a different brand of operator, the remotes and receivers are normally replaced as well, and the photocells and safety edges may need re-matching. This is worth knowing before choosing: the cheapest operator is not the cheapest decision if a later change means replacing every remote. Our guide to gate remote controls and spare copies explains the practical side.

Spares and service matter more than the badge

A gate that stops on a Friday needs a part and a technician, not a brochure. Before choosing a brand, ask where its spares come from, how long they take, and who will service the gate after the installer leaves. Emirtech installs and services gates across Abu Dhabi and Al Ain and recommends only what it can support; the gate barrier not opening guide lists the checks worth making first.

Heat, dust and duty cycle

UAE summer heat and dust shorten the life of an undersized operator. Compare the duty cycle (how many cycles an hour and a day the operator is built for), the leaf weight rating and the temperature range for the exact model, and size one step above the minimum for busy gates. This matters more than the brand name on the cover.

How Emirtech helps you choose

Emirtech surveys the gate, the use and the integration needs, then recommends an operator and gives a written, itemised quotation. It publishes no price list and claims no manufacturer-level credential or partner status. See the pages on CAME, BFT, FAAC and Nice automation.

Answers

Frequently Asked Questions

Which is the best gate automation brand in the UAE?

There is no single best brand. CAME, BFT, FAAC and Nice all make capable sliding, swing and barrier operators. The better question is which model suits your gate weight, traffic and heat, and who can install and service it locally.

Are CAME, BFT, FAAC and Nice remotes interchangeable?

Generally no. Each brand uses its own remote and receiver system, so remotes from one brand do not normally work with another brand's receiver. A receiver that learns several brands is a possible workaround, which we check case by case.

Can I replace my existing gate motor with a different brand?

Often yes, if the gate itself is sound. The remotes, receivers and sometimes the photocells are usually replaced too. We check the gate and the posts at the survey before recommending a replacement.

Should I use original spares or compatible parts?

Original or approved parts are the safer choice for control boards and safety devices, because the safety functions depend on them. We tell you at the survey which parts of your gate can be replaced like for like.

Which brand does Emirtech install?

Emirtech installs and services gate operators from several brands, including CAME, BFT, FAAC and Nice, as an independent integrator. It holds no manufacturer-level credential and claims no partner status with any of them.

Does the brand affect whether I can add ANPR or access control?

Usually not. ANPR and access control connect through standard inputs and outputs on the control board, so the gate can be integrated whichever brand is installed. The integration is planned at the survey.