ATM/CDM Networking · Abu Dhabi
Site IT, structured cabling, secure connectivity and ADMCC-approved surveillance for ATM and Cash Deposit Machine (CDM) enclosures across Abu Dhabi, delivered through main contractor or bank vendor channel. Hardware brand-agnostic: NCR, Diebold Nixdorf, Hyosung, GRG.
Get a free site survey Talk to a specialist
In short: This page covers “ATM / CDM Network & Site Support”. Emirtech's own engineers carry out the work, as an independent integrator serving Abu Dhabi and Al Ain. A site survey or assessment comes first, then a written itemised quotation.
| Who provides it? | Emirtech Technology, based at M44, Mussafah Industrial Area, Abu Dhabi, in operation since 2018. The work is carried out by Emirtech's own engineers. |
|---|---|
| Where? | Abu Dhabi and Al Ain, served from Emirtech's Mussafah, Abu Dhabi base; there is no Al Ain office. In Dubai: smart home, PABX and IP-PBX phone systems, IT AMC and time attendance by scheduled on-site visits, gate barriers, ANPR, video intercoms and turnstiles by Emirtech itself; CCTV, alarm and access control through SIRA-approved partners, with Emirtech coordinating. |
| What is covered | ATM / CDM Network & Site Support. |
| Survey and quotation | Emirtech publishes no price list: it surveys or assesses first and then gives a written, itemised quotation. |
| Credentials | Emirtech is an independent systems integrator. It holds no manufacturer-level credential of its own, and its ADMCC approval covers security systems only, not IT services. |
| Last reviewed | 21 October 2026 |
Emirtech Technology, founded in 2018 and based at M44, Mussafah Industrial Area, Abu Dhabi, delivers the site-level IT, network and surveillance layer around ATM and CDM enclosures for banks and financial institutions in Abu Dhabi and Al Ain — engaged through the bank's main contractor, fit-out partner or vendor channel, not directly by the customer bank. Our scope covers structured cabling inside the ATM kiosk or in-branch enclosure (Cat6/Cat6A patch leads, fibre tails where required, labelled patch panels), secure last-mile connectivity on the carrier circuit the bank's network team designates (typically MPLS or SD-WAN CPE back to bank core), 4G/5G cellular failover routers for path redundancy, in-cabinet UPS sizing and battery replacement, and environmental sensors — door contacts, temperature/humidity probes and optional seismic/tamper inputs feeding the bank's monitoring platform. On the surveillance side we install ADMCC-approved CCTV covering PIN-pad shoulder zones, customer transaction face capture, cash-loading dual-control angles and anti-skimming visual coverage of the card slot, with on-site NVR storage retention configured to the bank's policy. Hardware is brand-agnostic on the ATM itself (NCR, Diebold Nixdorf, Hyosung, GRG) — we cable to and around it but do not open or service the cash dispenser, note recycler, journal printer, EPP keypad or any vendor-sealed module, which remain strictly the OEM service contractor's scope. We are not a CBUAE-supervised entity, not a payment processor, not affiliated with Network International or UAESwitch, and hold no exclusive ATM-vendor channel partnership. We hold no manufacturer-level credential of our own (not relevant to ATM scope). For ADMCC-jurisdiction CCTV around the ATM enclosure we work to the approved-contractor regime. To brief us through your main contractor or bank vendor manager, call +971 55 651 7843 or email [email protected] for an Abu Dhabi site survey.
Site capabilities around the ATM/CDM enclosure
Cat6/Cat6A patch leads, labelled patch panels and short fibre tails inside ATM and CDM kiosks. We terminate to the bank-designated handoff and document port mapping for the bank's network operations team handover.
We rack and patch the MPLS or SD-WAN CPE designated by the bank's network team and add LTE failover routers for path redundancy. We do not own, operate or supervise the bank's WAN or core security policy.
Cameras covering PIN-pad shoulder zones, customer face capture, anti-skimming card-slot view and cash-loading dual-control angles. NVR retention configured to the bank's policy under the ADMCC approved-contractor regime in Abu Dhabi.
Right-sized UPS for the ATM site IT load, scheduled battery replacement, door contacts, temperature/humidity probes and optional seismic/tamper inputs wired back to the bank's monitoring platform via designated interfaces.
Engagement is always through the bank's main contractor, fit-out partner or vendor channel — we do not contract directly with the customer bank and we do not approach CBUAE-supervised processes. Call +971 55 651 7843 or request a free ATM/CDM site networking consultation.
Boundaries we will not cross
Note dispenser, recycler, journal printer, EPP keypad, card reader internals and any vendor-sealed module on NCR, Diebold Nixdorf, Hyosung or GRG units remain strictly OEM service-contractor scope. We cable to the ATM, not into it.
We do not hold CBUAE licensing, do not process payments, do not operate switching, and we are not affiliated with Network International or UAESwitch. Regulated payment and switching scope sits with the bank and its supervised vendors.
We install and patch the CPE the bank's network team specifies. Routing, firewall policy, encryption keys, monitoring and incident response on the bank's WAN are owned by the bank and its supervised network providers, not by Emirtech.
Cash-in-transit, replenishment, first-line and second-line cash incident response are performed by Loomis, Brinks or the bank's contracted CIT provider. We do not handle, transport, count or reconcile cash under any circumstance.
ATM and CDM environments sit at the intersection of regulated banking, OEM service contracts and site IT. We are clear about which slice we own.
If a bank, its main contractor or its vendor manager needs an honest Abu Dhabi site team for the network, cabling, power and CCTV layer around the ATM cabinet, we are happy to brief and quote inside that boundary.
Common questions
No. We hold no exclusive channel partnership with any ATM OEM. We install brand-agnostic site cabling and infrastructure around the ATM cabinet. Cash-mechanism service, EPP work and any vendor-sealed module always remain with the OEM's contracted service partner.
No. Emirtech is not a CBUAE-supervised entity, not a payment service provider, not a processor and not affiliated with UAESwitch or Network International. We deliver site IT and ADMCC-approved CCTV around the ATM enclosure under the bank's main contractor.
We are engaged through the bank's main contractor, fit-out partner or vendor channel for the ATM/CDM site works. We do not bypass those channels and we do not present ourselves as a direct bank vendor or framework supplier.
Abu Dhabi and Al Ain only for regulated electronic security work. The ADMCC approved-contractor regime governs the CCTV portion. We do not operate in Dubai (SIRA jurisdiction) for these works.
No. The note dispenser, recycler, journal printer, EPP keypad and any vendor-sealed module are strictly OEM service-contractor scope. We never open the safe, never handle cash, and never act as a cash-in-transit provider — that is Loomis, Brinks or the bank's CIT contractor.
Call +971 55 651 7843 or email [email protected] with the main contractor or bank vendor manager's brief, site address and access window. You can also request a quotation and our Mussafah M44 team will arrange a site survey.
ATM/CDM Networking · Abu Dhabi
Free site survey · transparent scope · honest costs · ADMCC-approved for security systems · Mussafah M44 home base since 2018.
Need a free Abu Dhabi site visit? Call +971 55 651 7843 or email [email protected] — we reply the same working day across Abu Dhabi and Al Ain.