Industrial gate triage
A factory gate, for example in Mussafah or ICAD II, can use a single-lane thermal head as a contactless triage alternative to the hand-held forehead gun, freeing the security guard from close contact.
Thermal Body-Temp Screening · Honest Scope
AI Thermal Body-Temperature Cameras in Abu Dhabi
A thermal body-temperature screening camera flags people whose skin-surface temperature reads above a threshold so a trained operator can refer them for a proper clinical check. That is the whole scope. It is a facility-screening triage aid, not a medical device, not a substitute for a clinical thermometer, and not a diagnosis. Done honestly it is useful at large lobbies, factory gates, and event entrances in Abu Dhabi — Mussafah and ICAD industrial gates, hotel ballroom check-in, public-realm event ingress — where guards otherwise rely on a hand-held forehead gun that requires close contact. A dual-spectrum head pairs a thermal microbolometer with a visible-light sensor, references a blackbody calibration target in the frame, and applies an emissivity and ambient-temperature correction so the displayed skin-temperature figure is consistent rather than drifting. Emirtech is the ADMCC-approved integrator that installs and configures the system with explicit non-medical scope. We do not claim accuracy that the device cannot deliver.
ADMCC ApprovedIndependent IntegratorFree Site SurveyTriage Only — Not Medical
What thermal body-temperature screening is — and what it is not
The mechanism is straightforward. A vanadium-oxide or amorphous-silicon microbolometer array — typically 384x288 or 640x480 thermal resolution — measures infrared radiation in the long-wave band and infers a surface temperature via the Planck relation, corrected for emissivity. Paired with a visible-light camera in the same housing, the dual-spectrum head displays a colour image with hot-spot overlays. A blackbody source of known temperature in the frame gives the camera a continuous calibration reference, which keeps the displayed figure stable as the camera body warms during the day. AI is used to find the face — specifically the inner canthus, near the tear duct, which correlates best with core temperature — and to filter out hot drinks, lit cigarettes, and shoulders that confuse a naive hot-pixel detector. The honest scope is this. The reading is skin-surface temperature in a specific facial region, not core body temperature. Clinical fever is defined on core temperature. Ambient air temperature, humidity, recent exertion, and direct sun exposure all shift the skin reading by tenths of a degree to a full degree, which matters when the alarm threshold sits at 37.5 to 38 degrees Celsius. The system is therefore a triage aid: anyone above threshold is referred to a trained operator with a clinical thermometer for a confirmatory reading; nobody is barred from entry on the camera reading alone. Emirtech does not manufacture this device, does not hold the medical-device approvals of the manufacturer, and does not provide a medical service. Any UAE medical-device registration, where one exists for a specific brand, is the manufacturer's, not ours. We are the integrator that installs, calibrates the blackbody reference, sites the ambient sensor sensibly, trains the operator, and writes the standard operating procedure that keeps the system honest.
What an honest thermal screening deployment looks like
A credible install starts with the lane. We measure standoff, head height, and ambient conditions at the planned position. A blackbody calibration target is sited in the camera frame at a stable position. Ambient temperature drift over the day is logged and the threshold is set after a written commissioning that records ambient conditions, distance, and operator workflow. We do not promise medical accuracy because the device does not deliver it.
The operational procedure matters more than the camera. The standard operating procedure covers who handles a flagged person, where they wait for confirmation, what the clinical thermometer reading is recorded against, and what happens if the confirmation also flags. We cross-link to thermal CCTV cameras for the broader thermal scope, and to mask detection and clean-environment compliance where similar facility-screening logic applies. All of it sits under our CCTV installation scope and the AI surveillance hub.
- Explicit non-medical-device scope written into the operator SOP
- Blackbody calibration target in the frame at a stable temperature
- Ambient temperature sensor sited away from direct sun and HVAC vents
- Inner-canthus AI region selection rather than naive hot-pixel detection
- Trained operator with a clinical thermometer for any flagged referral
- Logged threshold setting, distance, and ambient conditions in commissioning
Real-world use cases in Abu Dhabi
Hotel and conference ingress
Hotel ballroom check-in for large events can use a thermal head with a clearly signed referral lane, so a flagged guest is checked by a trained operator without disrupting the queue.
Healthcare visitor lobbies
Clinic visitor lobbies can use the screening as a contactless first-pass at the door, with all clinical decisions made by clinical staff using clinical instruments behind reception.
Public-realm event ingress
For organised public-realm events, the screening can triage crowd-volume ingress while the medical team handles any confirmed reading.
Answers
Frequently Asked Questions
Is a thermal body-temperature camera a medical device?
No. It is a facility-screening triage aid. It does not measure core body temperature; it measures skin-surface temperature in a facial region and infers a reading. Clinical fever is defined on core temperature with a calibrated clinical thermometer, which a trained operator must use for any confirmatory reading. We do not provide a medical service.
What accuracy can I expect?
With a blackbody calibration target in the frame and the inner canthus AI region selected, the displayed reading is typically within a few tenths of a degree Celsius of skin-surface temperature under stable indoor conditions. Outside those conditions accuracy drifts and the system is not appropriate. We do not claim a medical-grade specification.
What is the manufacturer approval status in the UAE?
Any UAE medical-device registration (with the Emirates Drug Establishment or another competent authority) is held by the manufacturer for the specific model, not by us. We can document the manufacturer's registration position for the device you choose and install accordingly. Emirtech itself is not a medical device authority and does not hold a medical registration.
How is data handled under UAE PDPL?
Temperature readings, when associated with an identifiable individual, are personal data under UAE PDPL Federal Decree-Law No. 45 of 2021. Handle them with a lawful basis, a notice to the people screened, a defined purpose, limited retention and restricted access, and confirm with counsel which data-protection rules apply, as health-related data may carry additional requirements. We help configure those settings and write the SOP; we are not legal advisors.
Is Emirtech the manufacturer?
No. Emirtech is an ADMCC-approved independent integrator. We install and configure thermal screening systems from established brands via authorised UAE distribution. We do not manufacture thermal cameras and do not claim brand-authorised status with thermal vendors. We hold no manufacturer-level credential of our own, which is unrelated.
Ready to secure your property?
Get a free site survey and no-obligation quotation from Abu Dhabi's ADMCC-approved security specialists.
Need a free site survey or quote in Abu Dhabi?
Talk to Emirtech's engineers — we reply the same working day across Abu Dhabi and Al Ain. CCTV, security, IT, AV and smart-building solutions.
Mon–Sat 8AM–7PM · [email protected] · Since 2018 · ADMCC-approved for security systems